Features

1.Solderingironusedlargepowerimportedheater,ironhandleusedhightemperatureresistantsiliconcable, importedheaternotonlysuitableforcommondesoldering,butalsoverysuitableforbigSolderjoints,

CoarseterminalandMiscellaneousdifficultwelding.

2.Solderingironpartaddthevibrationofdormancyfunction,sleeptimesetto10minutes,iron handle use imported heater iron handle.

3.HotairreworkpartaddAUTO/MANULfunction

Manual mode: air gun back into the handle frame, air gun to maintain the current state of the work,

the manual mode is suitable for frequent use of air guns, eliminating the need for back and forth to cool the warming process, convenient.

Automatic mode: air gun back into the handle frame, air gun automatic cooling to standby, automatic mode

for infrequently used air gun to save energy and reduce wear and tear on the machine, to extend the life of the machine

4.Powersupplypartadd5VUSBoutput,it’sconvenienttorepairandsupplypowertomobilephone

5.CurrentusedLED4digitaldisplay,0~2Amilliamperedisplay,bemoreaccuratethanpointerdisplay,

candirectreadtheAmvalue.

6.ThegoodsinsideboardusedoublepanelSMTtechnology,theperformancemorestabilityanddurable.

7.Largerterminal,largeroutputpower.

8.The iron holder is more professional and convenience ,the iron holder include solder tips flux

and cleaner tips copper wire ball,more convenience clean tips,its prolong use life.

9.The machine back side inside haveCooling fan,if the machine long time use of it ,

it will help the machine heat radiation, this is good for prolong the machine use life.

Characteristic

1.Controlled by Dual-Core microcomputer for fast temperature rising and keeping stable.

2.Large Multiple LED Displays

3.Adjust the airflow and temperature control rotation easily

4.The air gun automatically enters standby when the temperature is less than 70oC threshold.

5.Soldering iron with anti-static design to prevent electrostatic damage on dedicated SMA components.

6.Intelligence cool airflow features long service life of the machine and safe personal operation

7.ESD design of soldering iron to protect sensitive components

8.DC power supply has recovery function with continuous protection

9.The Power supply is used not only for service power supply on mobile phone repair, also can measure and test DC voltage

10.High-quality resistance for durable use

11.Fits for soldering and desoldering SOIC, CHIP, QFP, PLCC, BGA or other temperature-sensitive components

12.Full intelligence self-detection functions on air gun and iron to provide safe operation mode

13.Sensor on handle leads to operating mode (high temp) when picked up or to standby mode (low temp) when laid down

14.Suitable for heating shrink, drying, lacquer removal, viscidity removal, ice-out, pre-heating and glue soldering

15.With short circuit, open circuit, over-temp and over-load protection.

16.Fits for heating shrink, drying, lacquer removal, viscosity removal, ice-out, pre-heating and glue soldering.

Voltage: 110/220V ,50/60Hz AC (CE Approved)

Technical data

Rated voltage AC 220V±10% 50HZ ( 110V±10% 50HZ)

Total Power 720W+75W+30W=825W±10%(max)

Work environment 0-50°C

Iron parts	Gun parts	Dc power supply parts
Work Voltage :AC:26V±10% 50HZ	Work Voltage: AC:220V±10% 50HZ( 110V±10% 50HZ)	Work Voltage:AC 20V±10% 50HZ ( 110V±10% 50HZ)
Output power:50W±10%	Output power:720W±10%	Output power:30W
Temperature range:200°C-480°C	Temperature range:100°C-480°C	Output voltage:0-15V Output current:2A
Temperature stability:±2°C	Temperature stability:±2°C	Load stability:<0.01±2mv
Tip of ground impedance<2ohm		Recovery time:<100us
Tip of ground voltage<2mV		Ripple dB<1mvrms (virtual value)
		Temperature coefficient:<300PPm/°C
		Protection starting current:>standard value 10%